Are you tired of having no fence around your backyard? Are you exhausted of any possible intruders entering your yard or house from the backyard? If so, then installing a chain link panel fence can definitely protect your family from intruders.
While this is a good idea, there are certain things you need to know in terms of installing a fence. This will ensure your fence is safe for you and your family to use.
Keep reading for our tips for installing a chain link panel fence.
1. Design and Layout Your Fence
When installing a chain link panel fence, it is critical to ensure that the fence is properly designed and laid out. Begin by measuring the area and determining the length of the fence needed to cover the area. Measure the distance from the entire property line and determine how much fencing should be used for the sides and back.
Position the post within the property lines and make sure the fence is in line with the existing structures. Coordinate the panels with the posts and secure the panels with tension bands or bolts. And make sure to check local codes and regulations prior to installation to ensure the fence meets all standards.
2. Dig and Install Fence Posts
Preparatory steps such as marking the property and making sure the fence posts are square should be taken before digging. The depth and width of the holes will depend on the type of fencing being installed and the soil composition. Generally, for chain link fences, the posts should be buried to a depth of 36 with a width of 12-18.
Once the posts have been dug, concrete should be placed in the hole, and the post set in the center. It is important to make sure the posts are straight, and the concrete is firmly tamped.
If the posts are not straight, the entire fence can be weakened and become unlevel. By taking the time to properly install the posts, the fence will also be properly installed and supported.
3. Attach Fence Material and Tighten It
When it comes to installing vinyl fencing, the key is to attach the fence material and tighten it correctly. Start by digging deep enough post holes and placing the posts in the ground. Try to make the post holes as plumb as you can at the bottom so the posts remain in a straight line.
Once these are in place, slide the tension bands up the posts before attaching the top and bottom rails. Secure the top and bottom rails with short screws. Then install the chain link itself by rolling it out and then snapping it into the tension bands.
To properly tighten the fence material, use a tension bar and turnbuckle system. Start by lacing the bars through the chain link mesh. Make sure to secure the other end of the turnbuckles to the opposite post and use a wrench to make sure that everything is firmly in place.
Install a Chain Link Panel Fence Today
Installing a chain link panel fence is a great way to add fencing to your property. The tips provided in this article will help you complete the installation process with ease. With adequate preparation, the fence should provide safe and secure boundaries for years to come.
If you need professional help in this process, contact a local fencing contractor today!
Visit our blog posts if you want to read more fascinating topics.